 |
| Quantity: | |
|---|---|
1. PC Typical Properties of Laserable Overlay |
Polycarbonate film could be lasering and customization, excels in outstanding optical clarity, printability,
impact strength, and dimensional stability when compared with other types of plastic films.
2. PC Typical Properties of Laserable Overlay |
Item | Standard Value | ||
Thickness (mm) | 0.05-0.085 ±8% | ||
0.10～0.175 ±5% | |||
Impurity Quality | 0.50 mm2 Invisible | ||
0.30 mm2~0.50 mm2 1/500×500mm | |||
0.10 mm2～0.30 mm2 4/500×500mm | |||
0.05 mm2~0.10 mm2 5/500×500mm | |||
<0.05 mm2 No limit | |||
Surface | Matt/(fine) Velvet, flat, no goffer, no matt defect, no dust. | ||
Tensile Strength (Mpa) -ISO527-3 | ≧50(MD/CD) | ||
Break Strength (%) -ISO527-3 | ≧60(MD/CD) | ||
Folding Capacity
| Thickness <0.25mm， ≧13 | ||
Thickness ≧0.25mm，≧11 | |||
Light Transmittance (%) | ≧80 | ||
Haze (%) | ≦ 90 | ||
Surface Tension(Dynes/cm) -ISO 8296-2003 | ≧34 | ||
Heating Shrinkage (%) （135℃±2，10min） | Thickness≤ 0.175mm | MD | ≦2.5 |
CD | ≦0.5 | ||
Thickness＞0.175mm | MD | ≦1.0 | |
CD | ≦0.5 | ||
Vicat Softening Temperature(℃) - ISO 306-1994 | 150±3 | ||
*Customer design can be accept.
3. PC Typical Properties of Laserable Overlay |
4. Packing of PC Typical Properties of Laserable Overlay |
1. PC Typical Properties of Laserable Overlay |
Polycarbonate film could be lasering and customization, excels in outstanding optical clarity, printability,
impact strength, and dimensional stability when compared with other types of plastic films.
2. PC Typical Properties of Laserable Overlay |
Item | Standard Value | ||
Thickness (mm) | 0.05-0.085 ±8% | ||
0.10～0.175 ±5% | |||
Impurity Quality | 0.50 mm2 Invisible | ||
0.30 mm2~0.50 mm2 1/500×500mm | |||
0.10 mm2～0.30 mm2 4/500×500mm | |||
0.05 mm2~0.10 mm2 5/500×500mm | |||
<0.05 mm2 No limit | |||
Surface | Matt/(fine) Velvet, flat, no goffer, no matt defect, no dust. | ||
Tensile Strength (Mpa) -ISO527-3 | ≧50(MD/CD) | ||
Break Strength (%) -ISO527-3 | ≧60(MD/CD) | ||
Folding Capacity
| Thickness <0.25mm， ≧13 | ||
Thickness ≧0.25mm，≧11 | |||
Light Transmittance (%) | ≧80 | ||
Haze (%) | ≦ 90 | ||
Surface Tension(Dynes/cm) -ISO 8296-2003 | ≧34 | ||
Heating Shrinkage (%) （135℃±2，10min） | Thickness≤ 0.175mm | MD | ≦2.5 |
CD | ≦0.5 | ||
Thickness＞0.175mm | MD | ≦1.0 | |
CD | ≦0.5 | ||
Vicat Softening Temperature(℃) - ISO 306-1994 | 150±3 | ||
*Customer design can be accept.
3. PC Typical Properties of Laserable Overlay |
4. Packing of PC Typical Properties of Laserable Overlay |
