Add: 666 Wujin East Avenue,Changzhou,Jiangsu,China
Email: bbetter01@betterial.cn
Sales Dept.: 86-519-86235789;
86-519-86235988
Purchase Dept.: 86-519-86231388
Fax: 86-519-86235295
Salesman: 86-13961472972
QQ: 422846271
Skype: 422846271@qq.com
Material: | |
---|---|
Size: | |
Availability: | |
Quantity: | |
Product Features: 1. The solid state is non-viscous before UV curing; 2, excellent processing performance, simple cutting processing, high yield; 3, the fitting process is simple, easy to repair the secondary heavy industry; 4. High penetration rate, good reliability, yellow resistance and aging resistance after curing. | Instructions for use: 1. Surface cleaning:Use ethanol/acetone/isopropanol (IPA) 2. Fitting parameters:The temperature is 70-80℃, the pressure is 0.2-0.6Mpa, and the time is 60-180s 3. Defoaming parameters:The temperature is 60-70℃, the pressure is 0.2-0.6Mpa, and the time is 20-30min 4. Curing parameters:UV curing energy ≥2500 mJ/cm2 |
comparative item | OCF optical film | OCA packaging tape | LOCA glue |
Efficiency | The same equipment can be batch continuous production | slow | common |
Filling period of poor | unlimited | Can only fill 1/10 of the thickness of the gap | common |
Equipment cost accuracy | common | Very high | High |
Rate of fitting finished product | The first finished product is more than 95%, defective products can be reworked | Less than 75% is difficult to rework | Less than 90% is difficult to rework |
applied range | Unlimited size for all types | Suitable for small size fitting | Suitable for small and medium-sized product fitting |
Material requirements | There is no special requirement for the material of fitting products | There is no special requirement for the material of fitting products | Suitable for hard to hard material fit |
Product Features: 1. The solid state is non-viscous before UV curing; 2, excellent processing performance, simple cutting processing, high yield; 3, the fitting process is simple, easy to repair the secondary heavy industry; 4. High penetration rate, good reliability, yellow resistance and aging resistance after curing. | Instructions for use: 1. Surface cleaning:Use ethanol/acetone/isopropanol (IPA) 2. Fitting parameters:The temperature is 70-80℃, the pressure is 0.2-0.6Mpa, and the time is 60-180s 3. Defoaming parameters:The temperature is 60-70℃, the pressure is 0.2-0.6Mpa, and the time is 20-30min 4. Curing parameters:UV curing energy ≥2500 mJ/cm2 |
comparative item | OCF optical film | OCA packaging tape | LOCA glue |
Efficiency | The same equipment can be batch continuous production | slow | common |
Filling period of poor | unlimited | Can only fill 1/10 of the thickness of the gap | common |
Equipment cost accuracy | common | Very high | High |
Rate of fitting finished product | The first finished product is more than 95%, defective products can be reworked | Less than 75% is difficult to rework | Less than 90% is difficult to rework |
applied range | Unlimited size for all types | Suitable for small size fitting | Suitable for small and medium-sized product fitting |
Material requirements | There is no special requirement for the material of fitting products | There is no special requirement for the material of fitting products | Suitable for hard to hard material fit |